中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
SN/T 732.12-2013 (中英文版) (Pyrotechnic with fireworks Part 12: Determination of red phosphorus content) |
|||
GB 15742-2019 機動車用喇叭的性能要求及試驗方法(中英文版) Performance requirements and test methods of horn for motor vehicles |
|||
YD 5044-1997 同步數位系列(sdh)光纜傳輸設備安裝工程驗收暫行規定(中英文版) Provisional Standards for Check and Accept SDH Equipments Installation of Optical Fibre Cable Transmission Project |
|||
GB/T 50927-2013 大中型水電工程建設風險管理規範(中英文版) Code for risk management of large and medium scale hydropower projects |
|||
JG/T 11-2009 鋼網架焊接空心球節點(中英文版) Welded hollow spherical node of space grid structures |
|||
GB/T 36876-2018 中小學校普通教室照明設計安裝衛生要求(中英文版) Hygienic requirements of lighting design and setting in primary and middle school |
|||
GB/T 15926-2010 鉍礦石化學分析方法 鉍量測定(中英文版) Method for chemical analysis of bismuth ores - Determination of bismuth content |
|||
SB/T 10072-1992 掛麵生產工藝技術規程(中英文版) (Noodle production technology rules) |
|||
GB/T 3286.2-2012 石灰石及白雲石化學分析方法 第2部分:二氧化矽含量的測定 矽鉬藍分光光度法和高氯酸脫水重量法(中英文版) Methods for chemical analysis of limestone and dolomite - Part 2: The determination of silicon dioxide content - The silicomolybdic blue spectrophotometric method and the perchloric acid dehydration gravimetric method |
|||
SN/T 2420-2010 殺蟲劑噻蟲嗪顆粒劑有效成分含量的測定 高效液相色譜法(中英文版) Determination of active ingredient content in insecticide thiamethoxam water dispersible granules. High performance liquid chromatography |
|||
GB/T 33823-2017 乘用車控制臂用鋁合金模鍛件(中英文版) Aluminum alloy die forgings for control arms of passenger vehicles |
|||
YD/T 2747-2014 移動終端管理業務技術要求(第二階段)(中英文版) (Mobile terminal management business technology requirements (second stage)) |
|||
QB/T 2795-2010 食品添加劑 廣藿香(精)油(中英文版) Food additive. Oil of patchouli |
|||
DL/T 846.3-2004 高電壓測試設備通用技術條件? 第3部分:高壓開關綜合測試儀(中英文版) General technical specifications for high voltage test equipments. Part 3: High voltage switch integrate detector |
|||
SY/T 5601-2009 天然氣藏地質評價方法(中英文版) Geological estimation method for natural gas reservoir |
|||
GB/T 25151.4-2010 尿素高壓設備製造檢驗方法 第4部分:尿素級超低碳鉻鎳鉬奧氏體不銹鋼晶間腐蝕傾向試驗的試樣制取(中英文版) Fabrication and inspection method for high pressure urea equipment - Part 4: Intergranular corrosion tendency test specimen preparation for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade |
|||
GB/T 18113-2021 鉻酸鑭高溫電熱元件(中英文版) High temperature lanthanum chromite electric heating module |
|||
QB/T 1272-2012 毛皮 化學試驗樣品的準備(中英文版) Fur. Preparation of chemical test samples |
|||
SN/T 0801.21-2001 進出口動植物油脂葉綠素檢驗方法(中英文版) Animal and vegetables oils and fats for import and export. Method for the determination of chlorophyll |
|||
QC/T 563-2014 汽車轉向盤技術要求及試驗方法(中英文版) Performance and test methods for automobile steering wheel |
|||
GB/T 9015-1998 工業六次甲基四胺(中英文版) Hexamethylene tetramine for industrial use |
|||
SJ 2844-1987 梅花彈性墊圈(中英文版) Toothed spring washers |
|||
JT/T 33.6-1993 交通行業工人技術等級標準 公路工程與航務工程 水上拋填工(中英文版) Technical grade standards for workers in the communications industry. Communications engineering. Throw and fill workers on water |
|||
DL/T 1071-2007 電力大件運輸規範(中英文版) Code for transportion of electrical power large equipment |
|||
FZ/T 99002-1991 (中英文版) (FTW outer rotor type three-phase permanent magnet synchronous motor) |
|||
GB 19239-2013 燃氣汽車專用裝置的安裝要求(中英文版) Mounting requirements of special equipment for gas vehicle |
|||
JJG 111-1989 體溫計檢定規程(中英文版) Verification Regulation of Clinical Thermometer |
|||
GB/T 3048.5-2007 電線電纜電性能試驗方法 第5部分:絕緣電阻試驗(中英文版) Test methods for electrical properties of electric cables and wires - Part 5:Test of insulation resistance |
|||
NB/T 20442.10-2017 核電廠定期安全審查指南 第10部分:人因(中英文版) (Guidelines for periodic safety review of nuclear power plants - Part 10: Human factors) |
|||
GB/T 20131-2006 α/β流氣式正比計數器的標定和使用(中英文版) Calibration and usage of α/β gas proportional counters |
|||
SJ/T 31406-1994 螺杆式空氣壓縮機完好要求和檢查評定方法(中英文版) Requirements of readiness and methods of inspection and assessment for screw air compressors |
|||
JJF 030-2008 (中英文版) Flash contact tester calibration specification |
|||
TB 1549.7-1984 冷沖模托料滾道裝置 軸墊(中英文版) (Die care feeding device raceway shaft pad) |
|||
HJ/T 28-1999 固定污染源排氣中氰化氫的測定 異煙酸-吡唑啉酮分光光度法(中英文版) Stationary source emission. Determination of hydrogen cyanide. Iso-nicotinic-acid-3-methyl-1-phenyl-5-pyrazolone spectrophotometric method |
|||
GB/T 11203-2001 橡膠中鋅含量的測定 EDTA滴定法(中英文版) Rubber--Determination of zinc content--EDTA titrimetric method |
|||
GB/T 23111-2008 非自動衡器(中英文版) Non-automatic weighing instrument |
|||
GB 25684.1-2010 土方機械 安全 第1部分:通用要求(中英文版) Earth-moving machinery - Safety - Part 1: General requirements |
|||
GB/T 17238-2008 鮮、凍分割牛肉(中英文版) Fresh and frozen beef,cuts |
|||
HG/T 4035-2008 反應深藍M-2GE(C.I.反應藍194)(中英文版) Reactive dark blue M-2GE(C.I.Reactive blue 194) |
|||
GB/T 6036-2001 硫化橡膠或熱塑性橡膠 低溫剛性的測定(吉門試驗)(中英文版) Rubber,vulcanized or thermoplastic--Determination of low temperature stiffening(Gehman test) |
|||
SJ/T 11200-1999 環境試驗 第2部分:試驗方法 試驗td:表面組裝元器件的可焊性、金屬化層耐熔蝕性和耐焊接熱(中英文版) Environmental testing. Part 2: Tests Test Td:Solderability, resistance to dissolution of metallization and to soldering heat of Surface Mounting Devices |
|||
TB/T 1792.1-1999 貨車用空重車指示牌 i型(中英文版) (Heavy truck with an empty car signs. I type) |
|||
HG/T 2477-1993 砂磨機用機械密封技術條件(中英文版) Specifications for the grinder for mechanical seals |
|||
GB/T 28214-2011 實驗室玻璃儀器 吸量管顏色標記(中英文版) Laboratory glassware - Pipettes colour coding |
|||
LS/T 3524-1993 平轉穀糙分離篩通用技術條件(中英文版) (Separation sieve pan paddy general technical conditions) |
|||
YY/T 0681.4-2010 無菌醫療器械包裝試驗方法 第4部分:染色液穿透法測定透氣包裝的密封洩漏(中英文版) Test methods for sterile medical device package. Part 4: Detecting seal leaks in porous packages by dye penetration |
|||
GB/T 22380.3-2019 燃油加油站防爆安全技術 第3部分:剪切閥結構和性能的安全要求(中英文版) Explosion protected safety technique of the petrol filling station—Part 3:Safety requirements for construction and performance of shear valves |
|||
YD/T 669-1994 2048kbit/s 30路脈碼調製複用設備品質分等標準(中英文版) Quality grading criteria of 2048 kbit/s 30-channel PCM multiplex equipment |
|||
GB/T 6829-2017 剩餘電流動作保護電器(RCD)的一般要求(中英文版) General requirements for residual current operated protective devices |
|||
JG/T 31-2014 圓形新風空調機組(中英文版) (New air conditioning unit circle) |
找到:115477條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [83] [84] [85] [86] [87] [88] [89] |